Posts

Household Safety: It’s Mold Awareness Month!

House mold is no joke. Mold makes you sick, makes your house sick and ruins properties if left untreated. Keeping mold under control is critical for household safety.

The Department of Health in New York defines mold as “Molds are microscopic organisms that live on plant or animal matter. They aid in the breakdown of dead material and recycle nutrients in the environment. Present virtually everywhere, they can be found growing on organic material such as soil, foods, and plant matter. In order to reproduce, molds produce spores, which spread through air, water, or by insects. These spores act like seeds and can form new mold growth if the conditions are right.”

Mold gets into your house as a result of moisture. That moisture can come from a flood, leaky roof, plumbing leaks, cooking steam, heating steam, humidifiers, wet clothes drying inside a home, or condensation accumulating inside crawlspaces from any of the above.

For your family safety, here are the most important things you should know about mold, according to the Environmental Protection Agency.

Ten Things You Should Know About House Mold

  • Potential health effects and symptoms associated with mold exposures include allergic reactions, asthma, and other respiratory complaints.
  • There is no practical way to eliminate all molds and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
  • If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
  • Fix the source of the water problem or install a water leak detector to prevent mold growth.
  • Reduce indoor humidity (to 30-60%) to decrease mold growth by: venting bathrooms, dryers, and other moisture-generating sources to the outside; using air conditioners and de-humidifiers; increasing ventilation; and using exhaust fans whenever cooking, dishwashing, and cleaning.
  • Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
  • Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
  • Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
  • In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
  • Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.

 

Robert Siciliano personal and home security specialist toHome Security Source discussing ADT Pulse on Fox News. Disclosures